Need Help? Call us at 1.800.54.AVENT or visit www.aventamerica.com
11
First (Control) Pump
First (Control) Pump
12
Parts you will need for this step:
assembled
pump body
(see pages 9-10)
Double Pumping?
double pumping
connector
control handle
Second Pump
Control Cable
Socket
pump motor
electric
adaptor
control
cable
transparent tubing
wall plug cord
Twin Tubing
Port
Double pumping? Complete the next step
with your second assembled pump body.
Single pumping? Complete the next step
with the remaining tube.
1
3a
2
4
5
3b
Push the control handle onto the
assembled pump body so that it sits
firmly on top of the silicone diaphragm.
This assembly becomes the First (Control)
Pump which contains the electronics
of the pump.
Click the control cable into the socket
on the control handle.
Then securely attach one of the
transparent tubes to the port on
the control handle.
Transparent
Tubing Port
Control Cable
Socket
Push the double pumping connector onto the
pump body so that it sits firmly on top of the
silicone diaphragm. Securely attach the other
transparent tube to the double pumping
connector. When ISIS iQ DUO is fully assembled,
the Second Pump will mimic simultaneously the
speed and suction of the First (Control) Pump.
If you are single pumping, you can keep
the transparent tube out of the way by
attaching it to the white clip.
Securely attach the twin tubing
to the ports on the pump motor.
Connect the control cable
into the adjacent socket.
Connect the electric adaptor to power socket
on the pump motor.
Then connect the wall plug cord to the electric
adaptor and insert the plug into the wall outlet.
Connecting the Electronics of ISIS iQ DUO
™
Connecting the Electronics of ISIS iQ DUO
™
See section titled, ISIS iQ DUOPump Parts
Guide on page 1 for a description of First
(Control) Pump and Second Pump.
See section titled, ISIS iQ DUO Pump Parts Guide
on page 1 for a description of First (Control) Pump
and Second Pump