HELPFUL TIP!
Before you begin pumping, make sure that you have correctly washed, sterilised and assembled
the pump. Consult the ‘Hints to help you succeed’ opposite for tips on stimulating let-down and milk
flow.Wash your hands thoroughly and make sure your breasts are clean. Relax in a comfortable chair
and lean slightly forward so that your milk flows easily down the pump funnel into the milk container
(you can use cushions to support your back).
2
1
Turn on pump: Connect the power lead to the control
handle and plug into an electrical wall socket if necessary.
Press and hold the control button until the light flashes
ORANGE
and you hear the pump turn on (this can take
up to 5 seconds). Once the light turns solid
GREEN
, the
pump is ready to use.
If the light is flashing
RED
, refer to the ‘Troubleshooting
Guide’ on pages 19-20.
Create a reliable vacuum: Press the pump against your
breast to form a complete seal, ensuring that your nipple
fits into the funnel. Check you have a reliable vacuum
by compressing and releasing the control handle so
you can feel suction.
Control Handle Light
Flashing
ORANGE
– Control Handle Setting Up
Solid
GREEN
– Motor Ready/Pump in Manual
Control Mode
Flashing
GREEN
– Pump in Automatic Mode
Flashing
RED
– Warning
(see Troubleshooting Guide on pages 19-20)
Need Help? Contact Customer Services (see back page for details)
Expressing with ISIS iQ UNO
12
9219-iQUNO_GB_A6pgs.qxd 11/5/07 09:19 Page 10