KWR174002/01BR &
KWR174003/01BR
Manual (Draft Version)
Status :Draft, For Review
Page 6 of 11
Philips Proprietary &Confidential
Philips Home Control
Company
Restricted
2.4 RF Broken Link
RF link is broken when the RF (2.4G) connection is lost or when the receivers sleep or during system
shutdown states (S3, S4 or S5) or due to out-of-range.
2.5 RF ACTIVE / SLEEP
From RF ACTIVE >> SLEEP User action
Remote Control action
No key-press for about 8 seconds.
RF goes to SLEEP. In SLEEP mode, all LEDs are OFF.
No motion senses for about 8 seconds.
RF goes to SLEEP. In SLEEP mode, all LEDs are OFF.
2.6 RF Auto Connection
When the RC wakes up or resumes from SLEEP mode or come back within range of a powered-on
paired receiver, the RF link will be reconnected automatically. No RF re-pairing is needed.
2.7
RF Out-of-Range
When the RF link is broken or out-of-range and is stationary, the RC goes to SLEEP immediately to
conserve power.
