Philips L01.1L AC, Service Manual

Alignments

EN 68

L01.1L AC

8.

Default setting : 0.
OP45: ULTRA_BASS
0 : Ultra Bass is disabled or not applicable,
1 : Ultra Bass is enabled,
Default setting : 0.
OP46: VOLUME_LIMITER
0 : Volume Limiter Level is disabled or not applicable,
1 : Volume Limiter Level is enabled,
Default setting : 0.
OP47: INCR_SUR
0 : Incredible Surround feature is disabled,
1 : Incredible Surround feature is enabled,
Default setting : 1
OP50: PIP or ENERGY_SAVING
0 : PIP or ENERGY_SAVING is disabled or not applicable,
1 : PIP or ENERGY_SAVING is enabled,
Default setting : 0.
OP51: HOTEL_MODE
0 : Hotel mode is disabled or not applicable,
1 : Hotel mode is enabled,
Default setting : 0.
OP52: SVHS
0 : SVHS source is not available,
1 : SVHS source is available,
Default setting : 0.
Note: This option bit is not applicable for EU.
OP53: CVI
0 : CVI source is not available,
1 : CVI source is available,
Default setting : 0.
OP54: AV3
0 : Side/Front AV3 source is not present,
1 : Side/Front AV3 source is present,
Default setting : 0.
OP55: AV2
0 : AV2 source is not present,
1 : AV2 source is present,
Default setting : 0.
Note: For EU, when AV2=1, both EXT2 and SVHS2 should be 
included in the OSD loop.
OP56: AV1
0 : AV1 source is not present,
1 : AV1 source is present,
Default setting : 0.
OP57: NTSC_PLAYBACK
0 : NTSC playback feature is not available,
1 : NTSC playback feature is available,
Default setting : 0.
OP60: Reserved
Default setting : 0.
OP61: SMART_TEXT
0 : Smart Text Mode and Favorite Page  are disabled or not 
applicable,
1 : Smart Text Mode and Favorite Page  are enabled,
Default setting : 1.
OP62: SMART_LOCK 
0 : Child Lock and Lock Channel are disabled or not applicable 
for EU, 
1 : Child Lock and Lock Channel are enabled for EU,
Default setting : 1.
OP63: VCHIP (LATAM & NAFTA)/Txt_1pg(EU)
0 : VCHIP (LATAM & NAFTA)/Txt_1pg(EU) feature is disabled,
1 : VCHIP (LATAM & NAFTA)/Txt_1pg(EU) feature is enabled,
Default setting : 1.
OP64: WAKEUP_CLOCK
0 : Wake up clock feature is disabled or not applicable,
1 : Wake up clock feature is enabled,
Default setting : 1.
OP65: SMART_CLOCK
0 : Smart Clock Using Teletext and Smart Clock Using PBS is 
disabled or not applicable,
1 : Smart Clock Using Teletext and Smart Clock Using PBS is 
enabled. For NAFTA, menu item AUTOCHRON is present in 
the INSTALL submenu,
Default setting : 0.

OP66: SMART_SURF
0 : Smart Surf feature is disabled or not applicable,
1 : Smart Surf feature is enabled,
Default setting : 0.
OP67: PERSONAL_ZAPPING
0 : Personal Zapping feature is disabled or not applicable,
1 : Personal Zapping feature is enabled,
Default setting : 0.
OP70: MULTI_STANDARD_EUR
0 : Not for Europe multi standard set, or this option bit is not 
applicable,
1 : For Europe multi standard set.
Default setting : 0.
Note: This option bit is used to control the SYSTEM selection 
in Manual  Store :
If MULTI_STANDARD_EUR = 1 then SYSTEM = Europe, 
West Europe, East Europe, UK, France
otherwise SYSTEM = ‘Europe, West Europe, UK for West 
Europe’ (WEST_EU=1) or SYSTEM = ‘Europe, West Europe, 
East Europe for East Europe’ (WEST_EU=0)
OP71: WEST_EU
0 : For East Europe set, or this option bit is not applicable,
1 : For West Europe set,
Default setting : 0.
OP71 and 70: SYSTEM_LT_1, SYSTEM_LT_2
These two option bits are allocated for LATAM system 
selection.
00 : NTSC-M 
01 : NTSC-M, PAL-M
10 : NTSC-M, PAL-M, PAL-N
11 : NTSC-M, PAL-M, PAL-N, PAL-BG
Default setting : 00
OP70, 71 and 72: SOUND_SYSTEM_AP_1, 
SOUND_SYSTEM_AP_2, SOUND_SYSTEM_AP_3
These three option bits are allocated for AP_PAL sound 
system selection.
000 : BG
001 : BG / DK
010 : I / DK
011 : BG / I / DK
100 : BG / I / DK / M
Default setting : 00
OP73: COLOR_SYSTEM_AP
This option bit is allocated for AP-PAL color system selection.
0 : Auto, PAL 4.43, NTSC 4.43, NTSC 3.58
1 : Auto, PAL 4.43, NTSC 4.43, NTSC 3.58, SECAM
Default setting : 0
OP74: SIGNAL_STRENGTH / DVD WAKEUP TIMER (DVD 
COMBI), 3D_COMBFILTER(NAFTA)
Default setting : 0.
OP75: LNA_PP (for L01 AP cluster), VOICE_CONTROL
Default setting : 0.
OP76: ACTIVE_CONTROL
Default setting : 0.
OP77: TIME_WIN1 
00 : The time window is set to 1.2s
01 : The time window is set to 2s
10 : The time window is set to 5s
11 : not in use
Default setting : 01
Note: The time-out for all digit entries depend on this setting.

8.3.2

Tuner

Note: Below described alignments are only necessary when 
the NVM (item 7602) is replaced.

IF PLL
This adjustment is auto-aligned. Therefore, no action is 
required.