Settings · Entering Your Telephone Number and Name
37
EN
1
Press
OK
,
012
and
OK
.
2
Use
[
to select the time zone in which you are oper-
ating the device.
3 Enter the Deviance from UTC Manually:
Enter
the deviance (in hours) using the numeric keypad, for
example,
1
for UTC+1, The display shows the time
zone editor.
4
Confirm with
OK
.
Automatic Changeover Between Summer Time/Winter Time
Spaltenumbruch
Entering Your Telephone
Number and Name
Page Header
Your name and number are added together with date, time
and page number at the top edge of each fax transmission
(= header).
Cursor Navigation 1
Entering Name
1
Press
OK
,
021
and
OK
.
2
Enter the name using the keys (
A—Z
).
3
Confirm with
OK
.
Entering Number
1
Press
OK
,
022
and
OK
.
2
Enter your number.
3
Confirm with
OK
.
Setting the Ring Tones
Selecting the Ring Tone
Selecting the Ring Tone
You can use this function to select the standard ring tone.
You can assign a separate ring tone to entries in the tele-
phone book (see also chapter on saving an entry, page 19).
1
Press
OK
,
054
and
OK
.
2
Select the desired ring tone using
[
.
3
Confirm with
OK
.
Adjusting Volume Level
1
Press
OK
,
055
and
OK
.
2
Select the desired volume level using
[
.
3
Confirm with
OK
.
Setting the Number of Rings
Setting the Number of Rings
You can use this function to set the number of rings for the
fax reception mode. After the selected number of rings, the
device switches to fax reception in the fax mode. Select
0
to switch off the ring tone completely (see also chapter on
silent fax reception , page 39).
1
Press
OK
,
042
and
OK
.
2
Select the desired number of rings using
[
.
3
Confirm with
OK
.
Set Resolution
Set Resolution for Fax Transmis-
sion
1
Press
OK
,
4013
and
OK
.
2
Select the desired resolution using
[
:
STANDARD
—For documents without special features
FINE
—For texts with small print or drawings
SUPER FINE
—For documents with many details
PHOTO
—For photos
3
Confirm with
OK
.
Setting the Resolution for the
Copier
1
Press
OK
,
103
and
OK
.
2
Select the desired resolution using
[
:
AUTO
—Optimised adjustment for all types of docu-
ments
TEXT
—For texts with small print or drawings
QUALITY
—For documents with many details
PHOTO
—For the highest resolution
3
Confirm with
OK
.
Notice
Time Zone Editor
Press
[
to change the sign (
+
/
-
). You can
also enter values under an hour, example,
0.15 (or 0.25) for a quarter of an hour, 0.30
(or 0.50) for half an hour or 0.45 (or 0.75)
for three quarters of an hour.
Notice
Automatic Changeover Between Sum-
mer Time/Winter Time
With setting the country and time zone, the
automatic changeover between summer and
winter time is switched on. The automatic
changeover is switched off if you enter the devi-
ance from UTC manually using the time zones
editor
Notice
Enter Letters
Enter capital letters by pressing and holding
ú
key. You can enter space using
½
.
To insert special characters and symbols, press
;ü
. Press
ûü
to insert language specific spe-
cial characters. Select with
[
. Confirm with
OK
.
You can move the cursor using
[
. Use
C
to
delete individual characters.
lpf-5120-5125-5135-manual-uk-int-253117544-b.book Seite 37 Mittwoch, 16. Dezember 2009 10:01 10
