50
Philips · Laserfax 5120 · 5125 · 5135
EN
Clean scanner and document
feeder
Introduction
If lines appear on the printed pages or on the fax transmis-
sions or documents are not properly fed, you should clean
the scanner and the document feeder.
1
Lift the panel upwards until it snaps into position.
2
Clean the scanner glass on the underside (
‚
) and the
document guide/scanner film (=white plastic plate) on
the upperside (
ƒ
) lightly with a soft, lint-free cloth.
3
Clean the rubber roller of the document feeder
(6¦×)
with a soft lint-free cloth. Rotate the feed roller; You
must clean the entire roller.
4
Close the panel.
Cleaning the LED Print Head
Introduction
If white lines appear on the printed pages or the print qual-
ity is blurred, you should clean the LED print head.
1
Open the device by lifting the device cover forwards
DANGER!
Instructions for Cleaning!
Follow the instructions for cleaning, page 49.
CAUTION!
Do Not Open During a Print Job!
Never open the cover while the device is
printing.
DANGER!
Edges on the Device Cover!
Take care of the edges on the device cover.
You could injure yourself if you reach into
the device from the side.
lpf-5120-5125-5135-manual-uk-int-253117544-b.book Seite 50 Mittwoch, 16. Dezember 2009 10:01 10