Mechanical Instructions
EN 10
LC4.41A AA
4.
4.3.5
Small Signal Board
Figure 4-6 SSB connectors
Figure 4-7 Connector screws (picture taken from EU model)
1.
Very
cautiously
disconnect the LVDS cable [1] from the
panel (see Figure “SSB connectors”). Notice that this
connector is very fragile.
2.
Disconnect the other cables [2] from the panel.
3.
Remove the fixation screws [3].
4.
Remove the fixation screws [4] from the connector plate
(see Figure “Connector screws”).
5.
Slide the SSB module a few centimetres away from the
connector plate (see Figure “SSB shield”).
6.
Remove the fixation screws [5] and lift the shield from the
SSB module.
7.
Disconnect connector [6] (see Figure “SSB panel”).
8.
Unlock the catches [7] and lift the OTC TXT panel from the
SSB panel.
9.
Remove the fixation screws [8].
10. Remove the SSB panel.
Figure 4-8 SSB shield
Figure 4-9 SSB panel
4.3.6
Audio Amplifier Panel
Figure 4-10 Audio amplifier panel
1.
Disconnect all cables [1] from the panel.
2.
Remove the fixation screws [2] from the panel.
3.
Remove the panel.
G_16240_015.eps
250706
1
2
2
3
3
G_16240_016.eps
160206
4
G_16240_017.eps
250706
5
G_16240_018.eps
250706
6
7
8
G_16240_019.eps
160206
3
2
1