20
User manual
Recharge the batteries using the
4.6.1
Philips power supply
To recharge the batteries with the Philips power
supply:
Connect the Philips power supply to the
1
main power supply.
Connect the Digital Pocket Memo to the
2
Philips power supply.
D
Note
It is OK to continue using the Digital Pocket
Memo during recharge. The batteries will be
recharged while you work, and will continue
recharging even when the Digital Pocket Memo
is turned off.
Recharge the batteries through the
4.6.2
docking station
When the Digital Pocket Memo is connected
to the docking station, it is powered by the
docking station and not by the batteries. If
the Digital Pocket Memo is operated with
rechargeable batteries, the batteries are
automatically recharged while the Digital Pocket
Memo is connected to the docking station.
Disclaimer and Notices
Philips performs extensive testing with the most
popular configurations. However, since PC add-
ons and device drivers are updated continually,
conflict-free operation cannot be guaranteed.
