background image

Light System Manager    Product Guide

4

Light System Manager Environments

 

Multi-zone Installation

Headquartered in Burlington, Massachusetts, Philips Color Kinetics is a global LED 

lighting innovation and product design center for Philips. The 50,000 square ft (4,645 

square m) office, laboratory, and showroom space utilizes LED lighting technology 

throughout. Light System Manager manages the LED lighting zones in the building, 

including the lobby, conference rooms, work spaces, exterior signage, and product 

demonstration areas.

Lighting Zone Details

The lobby space features subtly animated light shows displayed on both RGB and 

white LED lighting systems. 20 unique shows ranging in duration from 10 minutes 

to 12 hours gently scroll across the ceiling, wall surfaces, and alcoves. Additionally, 

the fixtures installed directly above the reception desk are controlled by LSM as a 

separate region within the lobby zone, allowing for warm white illumination focused 

on the receptionist work space and visitor seating area, as needed.

How it Works

LSM uses two-dimensional maps to identify and control the lighting components in 

each lighting zone. The lobby map, for example, contains four rectangular clusters of 

fixtures, varying in size. The large rectangular area corresponds to the main ceiling, 

and the smaller rectangular areas match the wall adjacent to the elevator, the ceiling 

adjacent to the elevator, and the wall behind the reception desk.

0 seconds 

60 

120  

180 

240 

300 

360 

420 

480 

540 

600 

The lobby map allows LSM to accurately display light shows according to the 

position of each fixture. Based on a schedule, LSM continuously scrolls images (.BMP, 

.JPG) across the lobby map, creating a seamless animated effect. Because each image 

is configured to be larger than the map dimensions, only a portion of the image is 

displayed at any given time.

Playback Controls

Once set up, the LSM functions as a standalone device that automatically displays 

one or more scheduled light shows in each lighting zone. The lobby schedule calls for 

unique shows each day of the week and on certain holidays. Additionally, Ethernet 

Controller Keypads installed in multiple locations allow users to override a scheduled 

lobby show at the touch of a button and select from eight additional choices.

Philips Color Kinetics  

Headquarters and Showroom

Summary of Contents for Light System Manager













Reviews: