2
Monitor A
Sequencing Mode
1. Normal sequencing of camera inputs.
Blanking Mode
1. Normal sequencing of camera inputs.
Monitor B
Sequencing Mode
1. Normal sequencing (same as Monitor A).
2. “HOLD” condition.
3. “ALARM” condition.
Blanking Mode
1. Blank screen.
2. “HOLD” condition.
3. “ALARM” condition.
These switchers are compatible with
the LTC 5135 Series
Controller/Followers allowing control
of pan and tilt, zoom and focus as well
as auxiliary relays when used with
Allegiant
®
receiver/drivers.
Simple front panel controls insure easy
operation. They include: a dwell
button for a dwell adjust menu; select
buttons to select each channel; a
skip/clear button to skip channels or
to clear alarms; an alarm button to
arm the monitor (Monitor B for the
LTC 5108 Series); and a run button to
initiate auto-sequencing or to select
the next camera in the sequence.
Supplied as compact desk-top units,
these switchers can also be mounted
with a rack-mount kit. A 609 mm
(24 in) cable with 15-pin connectors is
provided for connecting a motion
detector or remote alarm closures to
the switcher.
Typical Installation Using LTC 5108 Series Switcher
