background image

English

3

The Camera series (LTC0500/60 and LTC0600/60) are provided with a correct polarized
mains power plug for 120V supply mains.The Camera can accept ‘nominal’ voltage
anywhere from 100-240V and can operate on either a 50 or 60Hz system.
If the Camera will be connected to an other mains voltage than 120Vac, use the PROPER
mains power connector for that mains voltage.
In case of using a mains voltage of 240V use a correct adapter plug with the following
specifications: NEMA plug type 2-15P, 2 pole 2 wire, 15 Amps-250V, or contact qualified
Service personnel. See also item Important Safeguards.

1)  Read Instructions - All the safety and operating instructions should be read before the

unit is operated.

2)  Retain Instructions - The safety and operating instructions should be retained for

future reference.

3)  Heed Warnings - All warnings on the unit and in the operating instructions should be

adhered to.

4)  Follow Instructions - All operating and use instructions should be followed.
5)  Cleaning - Unplug the unit from the outlet before cleaning. Do not use liquid cleaners

or aerosol cleaners. Use a damp cloth for cleaning.

6)  Attachments - Do not use attachments not recommended by the product

manufacturer as they may cause hazards.

7)  Water and Moisture - Do not use this unit near water - for example, near a bath tub,

wash bowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool, in an
unprotected outdoor installation, or any area which is classified as a wet location.

8)  Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount.

The unit may fall, causing serious injury to a person and serious damage to the unit.
Use only with a stand, tripod, bracket, or mount recommended by the manufacturer, or
sold with the product. Any mounting of the unit should follow the manufacturer’s
instructions, and should use a mounting accessory recommended by the manufacturer.
An appliance and cart combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the appliance and cart combination to overturn.

FCC Statement

2

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received including interference that may

cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

WARNING
YOU ARE CAUTIONED THAT CHANGES OR MODIFICATIONS NOT EXPRESSLY
APPROVED BY THE PART RESPONSIBLE FOR THE COMPLIANCE COULD VOID YOUR
AUTHORITY TO  OPERATE THE  EQUIPMENT.

This label may appear on the product.

The lightning flash with an arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated ‘dangerous voltage’
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user
to presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO

NOT EXPOSE THIS UNIT TO RAIN OR

MOISTURE.

Important Safeguards

Summary of Contents for LTC0500












Reviews: