Pulse interval
Min 1.9 Second
The minimal time
between flashes
Maximum output of
radiation
Setting 1
0.9s
5.76 +/- 1.28 J
Setting 2
1.2s
7.68 +/- 1.28 J
Setting 3
1.6s
10.24 +/- 1.28 J
Setting 4
1.75s
11.52 +/- 1.28 J
Setting 5
1.9s
12.8 +/- 1.28 J
Troubleshooting
This chapter summarizes the most common
problems you could encounter with the device. If
you are unable to solve the problem with the
information below, visit www.philips.com/support
for a list of frequently asked questions or contact
the Consumer Care Center in your country.
Problem
Possible cause
Solution
The
device/adapter
becomes warm
during use.
This is normal.
No action required.
When I place the
device on the
skin, it does not
release a flash.
The 'ready to
flash' light blinks
orange.
Your skin tone in
the area to be
treated is too dark.
Treat other body areas
with lighter skin tones with
Lumea.
30
English
