session and occasionally during the session. If it
detects a skin tone that is too dark for treatment
with Lumea, the 'ready to flash' light starts blinking
orange and the device automatically disables to
prevent you from developing skin reactions. This
means that it does not emit pulses when you press
the flash button.
Selecting the right light intensity
Lumea provides 5 different light intensities and
automatically advices you on the right setting you
should use based on your skin tone. You will
always be able to select the light intensity setting
as you find comfortable.
1
Press the on/off button to turn on the device.
The setting advice starts automatically,
indicated by the setting lights moving from left
to right.
Note: To adjust the light intensity setting
manually without using the skin advice, press
the on/off button again until you have reached
the required setting. The corresponding
intensity light level lights up green.
2
To get the advice on the light intensity, press
the device to your skin.
3
After the device scanned your skin, the
suggested intensity lights will blink green to
indicate which intensities you can use based on
your skin tone.
4
Press the on/off button again to confirm that
you want to use the suggested setting advice to
start using the device.
19
English
