26
English
IMPORTANT!
When in Eco Power standby mode, it is not
possible to show the clock time or set the
clock / timer function
.
Clock setting
The clock can be set in either 12-hour or 24-hour mode
("
12
:
00 AM
" or "
00
:
00
", for example).
1
In standby mode, press
CLOCK•TIMER once
.
●
While in the active source mode (DISC or TUNER, for
example), press
CLOCK•TIMER
twice
.
2
Press
PROG
repeatedly to select clock mode.
➜
"
12
:
00 AM
" or "
00
:
00
" starts flashing.
3
Press
S
or
T
to set the hours and minutes.
To increase the speed, hold down
S
or
T
.
4
Press
CLOCK•TIMER
again to store the setting.
➜
The clock starts working.
To exit without storing the setting
●
Press
Ç
on the system.
To view the clock time in other source mode
●
Press
CLOCK•TIMER
.
➜
The clock is displayed for a few seconds.
➜
If the clock has not been set, "
--
:
--
" is displayed.
Notes:
– The clock setting will be cancelled when the power cord is
disconnected or if a power failure occurs.
– During clock setting, if no button is pressed within 90
seconds, the system will exit clock setting mode automatically.
Radio Reception
Clock / Timer
R
ADIO
R
ECEPTION
/ C
LOCK
/T
IMER
Listening to preset radio
stations
●
In tuner mode, press
1
or
2
or use the
numeric keypad
(0-9)
on the remote control to select the desired preset
number.
➜
The preset number, radio frequency, and waveband are
displayed.
Erasing a preset radio station
1
Press
1
or
2
or use the
numeric keypad (0-9)
on the
remote control to select the preset radio station to be
erased.
2
Hold down
Ç
on the system until “
PRESET DELETED
”
is displayed.
➜
The deleted radio frequency remains on the display.
➜
The preset numbers of all other preset radio stations in
the band with higher numbers also decrease by one.
●
Repeat
steps 1–2
to erase other preset radio stations.
