38
English
3139 115 22872
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to remedy a problem by following these hints, consult your dealer or
Philips for help.
No power.
No picture.
Completely distorted picture or black/
white picture.
The aspect ratio of the screen cannot be
changed even though you have set the
TV display.
No sound or distorted sound.
The DVD player does not start playback.
–
Check if the AC power cord is properly
connected.
–
Press the STANDBY ON on the front of the
DVD system to turn on the power.
–
Refer to your TV’s manual for correct Video In
channel selection. Change the TV channel until
you see the DVD screen.
–
Press DISC on the remote.
–
If this happens when you changing the setting
of the ‘TV TYPE’, wait for 15 seconds for auto
recovery.
–
Check the video connection.
–
Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
–
Clean the disc.
–
The aspect ratio is fixed on the DVD disc.
–
Depending on the TV, it may not be possible to
change the aspect ratio.
–
Adjust the volume.
–
Check the speaker connections and settings.
–
Press the correct source button on the
remote (TV or AUX/DI, for example) to
choose the equipment that you want to hear
through the DVD system.
–
Insert a readable disc with the playback side
facing down. The DVD+R/CD-R must be
finalised.
–
Check the disc type, colour system (PAL or
NTSC) and region code.
–
Check for any scratches or smudges on the disc.
–
Press SETUP
to turn off the setup menu screen.
–
You may need to enter the password in order
to change the parental control rating level or
to unlock the disc for playback.
–
Moisture has condensed inside the system.
Remove the disc and leave the system turned
on for about an hour.
Problem
Solution
Troubleshooting
Visit us at www.p4c.philips.com for service support
001-041-LX39-22-Eng2
3/15/04, 6:16 PM
38