14
User Manual
Loading the ink film
1
Carefully remove the rubber rings from the new ink
fi lm. Take care not to damage the ink fi lm.
2
Lay the large roll in the grooves provided in the rear
ink fi lm compartment. Th
e blue toothed wheel must
be on the right-hand side.
3
Now take the small roll and lay it in the front ink fi lm
compartment. Make sure that the blue toothed wheel
is on the right and the pin on the left is inserted in the
depressions.
4
Turn small roll forward to tension the ink fi lm. Make
sure that the ink fi lm is not creased.
5
Break out the new Plug’n’Print card and insert it in
the slot to the left of the ink fi lm compartments.
6
Close the machine by swinging the operation panel
forward, until it snaps in.
Loading paper
Before you can copy documents, paper must be loaded in
your fax machine. Please use only the following paper for-
mat: standard
A4
210 × 297 mm. Th
e fax machine works
with normal paper used for writing and copying and has
been optimised for smooth 80 g/m² paper. Th
e smoother
the paper surface the better the print quality.
1
Insert the paper tray in the slots provided behind the
paper feed mechanism.
2
To prevent several sheets being drawn into the ma-
chine at once, fi rst fan out the paper to separate the
sheets and then straighten the stack on a fl at surface
before inserting it into the paper feed.
Summary of Contents for Magic 3-2
Page 1: ...Easy Install User Manual ...