25
User Manual
Hands-free operation
z
You can make a call without using the cordless telephone
or let persons in the same room participate in the con-
versation. To do this, press the button
z
on the fax ma-
chine before dialling or when a call is forwarded from
your cordless telephone to the fax machine. Th
e micro-
phone and the loudspeaker on the fax are now activated.
Caller line identification
(not available in all countries)
Calling line identifi cation is a service that makes it pos-
sible to identify the caller based on the telephone number
shown on the display even before the connection is estab-
lished. If you receive a telephone call during your absence,
the symbol
I
will appear on the display. Th
e telephone
numbers of the last ten received calls are stored.
1
Press
PP
on your fax machine for two seconds.
2
Using
u
you can now step through the entries.
Th
e new entries are marked with an “
*
”.
3
To call back the displayed number just press
(
/
L
on the cordless telephone.
To delete an entry press
C
. Choose with
u
and
confi rm deletion by pressing
OK
.
If you set
FAX
RINGS
with
MENU
31
or
32
to
0
, then the telephone number cannot be displayed
on your external telephones.
Activate call waiting
If you would like to be informed of new calls
during
a telephone call (call waiting), press
MENU
42
and
OK
. Use
<
/
>
to select
ACTIV. CW? YES
and con-
fi rm with
OK
.
Deactivate call waiting
If the call waiting function is activated and you hear
disturbing sounds, you can deactivate the call waiting
function: Press
MENU
42
and
OK
. Use
<
/
>
to
select
ACTIV. CW? NO
and confi rm with
OK
.
Easylink
Using additional telephones
Your fax machine is equipped with a cordless telephone.
You can also connect further telephones to the same
telephone line (see
Installation
/ Additional devices).
However, the additional phone must be set to dual-tone
multi-frequency method. If your telephone connection
requires the pulse dialling method, then you would need
to briefl y reset your additional device to use it. For more
information about this, please see the user manual for
your device.
Th
ere are various codes that allow you to transfer calls
or faxes between the cordless handset, fax machine and
other phones. Th
ey are shown in the table below.
To change codes
*5
and
**
below, call up function
34 on the fax machine.
v
Only use this function when absolutely neces-
sary!
If you need to change the predefi ned codes, select func-
tion 34 on the fax machine by pressing
MENU
,
34
and
OK
. Enter two diff erent codes and confi rm each
code with
OK
. Each code should begin with
*
or
#
.
Please note that the Easylink codes must be diff erent.
Otherwise on the display appears:
CODE
not
OK
Summary of Contents for Magic 3-2
Page 1: ...Easy Install User Manual ...
