48
User Manual
2
Open the operation panel by lifting in the middle.
When you hear a soft click, the panel is engaged.
3
Open the scanner cover by pressing the two lugs in.
Th
e cover will open downwards.
4
Use a soft cloth to gently wipe the scanner glass on the
top (
A
) and the white strips on the bottom (
B
).
5
Close the scanner cover on the left and right, making
sure it clicks into place.
6
Close the panel so that it also clicks into place.
7
Insert paper (see
Installation
/ Loading paper).
Cleaning the document feed roller
… when a black stripe appears at the top of a copy.
… when two pages are printed out when copying or send-
ing a single page or when the recipient receives two
pages.
1
Open the machine and the scanner cover by pressing
the latch (
A
) inward. Clean the feed roller (
B
) and the
rubber opposing element on the underside (
C
) with
a soft, lint-free cloth moistened with cleaning alcohol
(96 percent). Turn the feed roller with a slight upward
pressure. You must clean the entire roller.
2
With a Fax-Cleaner: Place the fax cleaner page into
the document feeder and wait until the page is pulled
in. Press
STOP
. Th
e page is ejected. Repeat this proc-
ess at least once.
Troubleshooting
If you cannot fi x the problem based on the instructions
below, you should proceed as follows:
1
Disconnect the mains.
2
Wait at least ten seconds and reconnect.
3
If the fault reoccurs, please contact your customer in-
formation centre. Th
e number is on the back of this
manual.
Summary of Contents for Magic 3-2
Page 1: ...Easy Install User Manual ...