56
Philips · PPF 685 · 695
EN
Cleaning
Instructions for Cleaning!
Fax Cleaning Sheets
1
Remove the paper from the paper feeder and take the
paper tray out of the device.
2
Open the device by lifting the panel using grip in the
centre and folding it up.
3
Open the scanner cover and the cover of the automatic
document feeder by first pushing the support (
A
) and
then the support (
B
) inside. The cover (
C
) falls freely.
4
Lightly wipe the upper side of the scanner glass (
A
) and
the lower side of the document feeder/scanner film (=
white plastic plate) (
B
) with a cloth.
5
Clean the feed roller (
A
) and the underside of the sup-
port pad of the feeder roller (
B
) with a soft, lint-free
cloth moistened with cleaning alcohol (96 percent).
Rotate the feed roller; You must clean the entire roller.
6
Close the scanner cover and the cover of the automatic
document feeder. Both the supports must securely snap
into place.
7
Turn the blue gear wheel forward to tension the ink
film. The ink film must not have any creases.
8
Close the device. Insert the paper tray in the opening
provided for it behind the paper feeder. Insert paper
again.
DANGER!
Instructions for Cleaning!
Unplug the device from the power socket before
cleaning it. Use a soft, lint-free cloth. Never use
liquid or easily flammable cleansers (sprays,
abrasives, polishes, alcohol, etc.). Do not allow
any moisture to reach the interior of the device.
Notice
Fax Cleaning Sheets
Special fax cleaning sheets are available as acces-
sories from our call centre. Insert a sheet into the
document feeder. Press
STOP
; the page is
ejected. Repeat this process at a few times.
DANGER!
Device can Close with a Snap!
Lock the cover of the device completely into
place when opening the device. You could be
injured if the cover falls while you are work-
ing on the device.