3
Key Charts
1
Red Indicator Light
The Red Indicator Light blinks to show
that the remote control is working and
also provides feedback during program-
ming sequences.
2
Component Keys
Press
TV
,
VCR
,
CBL
,
AUD
,
DSS
, or
CD
once
to select a home entertainment compo-
nent to control.
3
CH Keys
Use
CH +
(or
CH -
) to select the next
higher (or lower) channel for the selected
home entertainment component.
4
VOL Keys
Use
VOL +
(or
VOL -
) to raise (or lower)
the sound volume.
5
I-TV Key
Press
I-TV
to access the On-Screen Menu
for your home entertainment compo-
nents (see page 8).
6
EXIT Key
Use
EXIT
to exit out of the selected com-
ponent’s menu or guide.
7
SELECT Key
Use
SELECT
to choose options from your
selected component’s menu or guide.
8
GUIDE Key
Use
GUIDE
to display the programming
guide for your components (if applicable).
9
MUTE Key
Press
MUTE
once to turn sound off or on.
0
LAST Key
Press
LAST
once to recall the last channel
and to page back one screen in the
main menu.
q
SLEEP Key
Press
SLEEP
to activate your TV’s internal
sleep timer.(Not available for all TVs.)
w
LIGHT Key
Press
LIGHT
once to turn on or off the
keypad back light.
e
POWER Key
Press
POWER
once to turn on or off the
selected home entertainment component.
r
Keypad
Use the keypad (
0 ~ 9
) to directly enter
in channels (for example, 09 or 31). The
keypad is also used for all programming
sequences, such as entering in your pro-
gramming codes.
t
SCAN Key
Press
SCAN
once to change channels every
3 seconds. Press it again to stop the scan.
y
ENTER Key
Press
ENTER
once after entering channel
numbers on some TV models.
u
VCR Transport Keys
Use the VCR Transport Keys to control
your VCR, as well as CD or DVD player.
Press
REC
twice to record a tape.
i
FC1 and FC2 Keys
User-programmable Favorite Command
Keys (see page 9 for details).
o
MCP Key
Multiple-component On/Off Key (see
page 8 for details).
p
TV/VCR Key
Press
TV/VCR
once to view VCR playback
or TV through the VCR.
a
SET Key
Use
SET
for all programming sequences.
Before using your new I-TV remote control,
you will need to obtain and install new bat-
teries, as described on the next page.
Then you’ll also need to program the I-TV
remote control with the correct code num-
bers for your specific components. See
instructions starting on page 5.
SETTING UP YOUR REMOTE CONTROL
KEYS AND FUNCTIONS (continued)
REM380 Manual Engl 12/28/99 12:10 PM Page 3