24
There is a wide range of audio and video equipment that can be connected
to your TV. The following connection diagrams show you how to connect it.
See also
Connection diagrams
in the
INSTALLATION
menu where the
different connection possibilities are shown. Each time a menu item is selected
a graphic is shown of the connection. Those graphics have no operational
function.
Video recorder
•
Connect the aerial cables
1
,
2
and, to obtain a better picture quality,
eurocable
3
as shown opposite.
If your video recorder is provided with the EasyLink function, the eurocable supplied
with it, should be connected to
EXTERNAL 2
to benefit from the EasyLink functionality.
Select VCR Type
(only for 32” or 82 cm sets)
&
Select
Ext2 Input
in the Setup menu of the
INSTALLATION
menu.
é
Select
VCR
or
Other
, according to whether you have connected a video
recorder or another peripheral to the
EXTERNAL 2
euroconnector.
“
Select
VCR Type
in the Setup menu.
‘
Select
Non PALplus
or
PALplus
according to whether you have connected
a Non PALplus or PALplus video recorder.
You have to do the following if you do not connect the eurocable
3
,
Search for and store the test signal of the video recorder
•
Unplug the aerial cable
1
from the aerial socket
x
of your video recorder.
•
Switch on your TV and put the video recorder on the test signal. (See the
handbook for your video recorder.)
•
Search for the test signal of your video recorder in the same way as you
searched for and stored the TV signals. See Installation, Searching for and
storing TV channels, Manual Installation, p. 6.
•
Store the test signal either under programme number 0 or between 90 and 99.
•
Replace the aerial cable in the aerial socket
x
of your video recorder after
you have stored the test signal.
Decoder and video recorder
•
Connect a eurocable
4
to your decoder and to the special euroconnector of
your video recorder. See also the video recorder handbook.
See Define Decoder/Descrambler prog. numbers, p. 8.
You can also connect your decoder directly to
EXTERNAL 1
or
2
with a
eurocable.
Connect Peripheral Equipment
CABLE
2
EXTERNAL
1
2
3
4
Amplifier
Front speakers
Rear speakers
DVD
Decoder/Descrambler
VCR1
VCR2
Antenna
J
Connection diagrams
4807.1 gb 19-02-1999 12:15 Pagina 24
