MC-M350/22-1
18
English
Clock/Timer
Setting the clock
1
In standby, press and hold
CLOCK SET • RDS
/
.
➜
The clock digits for the hours flash.
2
Press
VOLUME
–/+ to set the hours.
3
Press
CLOCK SET • RDS /
again.
➜
The clock digits for the minutes flash.
4
Press
VOLUME
–/+ to set the minutes.
5
Press
CLOCK SET • RDS /
to confirm
the time.
Note:
– The backlight for clock display is dim in standby.
Setting the timer
●
The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
●
You can also use it to record a favourite tuner
programme at a set period (see “Recording
timer”)
●
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
In standby mode, press
TIMER SET /
on the
system for more than 3 seconds.
2
Press
SOURCE
or
VOLUME
–/+ to select
sound source.
➜
Display sequence shows
CD
,
TUNER
,
TAPE
or
REC TUN
.
3
Press
TIMER SET /
to confirm your desired
mode.
➜
Display sequence scrolls
SET ON TIME
and
flashes. The clock digits for the hours flash.
4
Press
VOLUME
–/+ to set the hours.
5
Press
TIMER SET /
again.
➜
The clock digits for the minutes flash.
6
Press
VOLUME
–/+ to set the minutes.
7
Press
TIMER SET /
to confirm the time.
➜
The timer is now set and activated.
Activating and deactivating
TIMER
●
In standby or during playback, press
TIMER ON / OFF
on the remote control
once.
➜
Display shows
if activated, and disappears
if deactivated.