14
English
3140 115 31971
Radio Reception
Tuning to radio stations
1
Select
TUNER
source.
➜
TUNER
is displayed briefly.
2
Press
BAND
once or more to select your
waveband.
3
Press down on
TUNING
à
or
á
and release
button.
➜
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning:
SEARCH
.
➜
If a FM station is received in stereo,
STEREO
is
shown.
4
Repeat step
3
if necessary until you find the
desired station.
●
To tune to a weak station, press
TUNING
à
or
á
briefly and repeatedly until you have
found optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only programme
stations which are not in the memory already.
1
Press
PRESET
3
or
4
(on the remote control
¡
or
™
) to select the preset number where
programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press
PROGRAM
for more than 2 seconds to
activate programming.
➜
AUTO
is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by MW and LW. The last
preset automatically stored will then be played.
Manual programming
1
Tune to your desired station (see “Tuning to
radio stations”).
2
Press
PROGRAM
to activate programming.
➜
PROGRAM
flashes in the display.
3
Press
PRESET
3
or
4
(on the remote control
¡
or
™
) to allocate a number from 1 to 40 to
this station.
4
Press
PROGRAM
again to confirm the setting.
➜
PROGRAM
disappears, the preset number and
the frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.
