11
4
For the left speaker, fi nd the sockets on
the main unit marked ‘LEFT’.
5
Repeat steps 2-3.
Connect audio cables
To hear audio from other audio devices as well
as the DVD Micro Theater speakers, select a
preferred audio connection:
Option 1: connect a coaxial cable
•
Option 2: connect analog audio
•
cables
Option 3: connect a headphone
•
Option 1: connect coaxial cable
You can enjoy multi-channel surround sound
from this unit when it is connected to a digital
audio device.
1
Connect a coaxial cable (not supplied)
to the digital input socket on the audio
device.
Option 2: connect analog audio cables
1
Connect an audio cable (red/white ends)
to the audio input sockets on an audio
device.
3 Connect
Preparations
1
Place a soft cloth on a hard, fl at, stable
surface.
2
Place the unit onto the cloth.
3
Remove the socket cover.
Connect speakers
Note
Insert the stripped portion of each speaker wire into
•
the socket completely.
Connect only speakers with impedance that is the
•
same or higher than the supplied speakers. Refer to
the Specifi cations section of this manual.
To insert each speaker wire: Hold down
the socket fl ap. Insert the speaker wire fully.
Release the socket fl ap.
1
For the right speaker, fi nd the sockets on
the main unit marked ‘RIGHT’.
2
Insert the red wire to the red (+) socket.
3
Insert the black wire into the black (-)
socket.
English
EN
