English
39
✔
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
✔
Select the correct source (DISC or AUX for
example) before pressing the function button.
✔
Point the remote control at the remote sensor
of the unit.
✔
Reduce the distance to the player.
✔
Remove any possible obstacles.
✔
Replace the battery with new one.
✔
Check that the battery is loaded correctly.
✔
Place the DVD micro system as far away as
possible from electrical devices (such as
speakers, TV) that may be causing interference.
✔
Check all speakers for correct polarity.
✔
Check that the output of the video signal is
switched to 'Ypbpr'.
The Clock/Timer setting is erased.
The remote control does not function.
Low hum or buzz sound.
Low bass response.
Unable to select Progressive Scan
Troubleshooting
pg021-040_MCD179_58_Eng 3/27/08,
15:32
39