13
1
Connect a scart cable (not supplied) to:
the
•
SCART
socket on this unit.
the
•
SCART
socket on the TV.
Option 2: Connect through
component video
Connect a progressive scan TV through
component video for higher quality video.
Note
The progressive scan video quality is only
•
available when a progressive scan TV is
connected.
If your TV does not support progressive scan,
•
you cannot view the picture.
For how to activate progressive scan on your
•
TV, refer to the TV user manual.
Connect a progressive scan TV through
component video for higher quality video.
1
Connect component video cables (red/
blue/green - not supplied) to:
the
•
VIDEO OUT
(
Pr/Cr Pb/Cb Y
)
sockets on this unit.
the component input sockets on the
•
TV.
TV
Pr/Cr Pb/Cb Y
COMPONENT VIDEO IN PUT
Tip
For optimal reception, fully extend and adjust
•
the position of the antenna.
For better FM stereo reception, connect an
•
outdoor FM antenna to the
FM AERIAL
jack.
The unit does not support MW radio
•
reception.
1
Connect the supplied FM wire antenna to
the
FM AERIAL
socket on the unit.
Connect TV
Connect video cables
With this connection, you can watch video
from the unit on the TV screen.
You can select the best video connection that
your TV supports.
Option 1: Connect through SCART (for a
•
standard TV).
Option 2: connect through component
•
video (for a standard TV or Progressive
Scan TV).
Option 3: connect through S-Video (for a
•
standard TV).
Option 4: connect through composite
•
video (CVBS) (for a standard TV).
Option 1: Connect through SCART
TV
English
EN
Summary of Contents for MCD183
Page 2: ......