13
English
Installation
Step 4: Placing the set and
speakers
With the supplied detachable stands and wall
mounting kit, you can either place the main set
and speakers on desktop or mount them onto
wall. Desktop installation is taken for example
here. For how to mount the system onto wall,
please refer to
Appendix
and the attached
Wall
Mounting Instructions
.
1
Align the side marked
PRESS
4
of the larger-
size stand with the slots at the bottom of the
main set.
2
Push the stand down into the slots until you hear
a click.
3
Attach the two smaller-size stands to the
speakers in the same way.
4
Place the main set and speakers upright on the
desktop with the support of the stands.
Note:
– To remove the stand from the main set or either
speaker, while pressing down PRESS
4
, pull the
stand out from the slots.
Step 5: Connecting the power
cord
After everything is connected properly,
plug in the AC power cord on the rear of
the subwoofer to the power outlet.
Never make or change any connection with the
power switched on.
Optional: Connecting additional
equipment
Listening to the playback of a non-USB
device
AUDIO OUT
L
R
VCR
(for example)
CONNECT TO SUB WOOFER
R
L
SPEAKERS 6
Ω
Y/Pb/Pr OUT
A/V OUT
●
Connect the system's
AUX IN (R/L)
jacks to
the
AUDIO OUT
jacks on the other audio/
visual device (such as a VCR, Laser Disc player or
cassette desk)
(cable not supplied)
.
●
Before starting operation, press
SOURCE
on
the front panel to select AUX or press
AUX
on
the remote control in order to activate the input
source.
pg001-pg020_MCD299-98-Eng-A
2007.9.27, 13:04
13
