12
5
Press
CLOCK/DISPLAY
WRFRQÀUP
The minute digits are displayed and
»
begin to blink.
6
Press
/
to set the minute.
7
Press
CLOCK/DISPLAY
WRFRQÀUP
Tip
To view the clock during play, press
CLOCK/
DISPLAY
repeatedly until the clock is
displayed.
Turn on
1
Press
POWER
.
The unit switches to the last selected
»
source.
Switch to standby
1
Press
POWER
to switch the unit to
standby mode.
The backlight on the display panel is
»
dimmed.
The clock (if set) appears on the
»
display panel.
Note
If you are not going to use the remote control
for a long time, remove the batteries.
Do not use old and new or different types of
batteries in combination.
Batteries contain chemical substances, so they
should be disposed of properly.
Auto install radio stations
When you connect the unit to the power
VXSSO\IRUWKHÀUVWWLPHRUQRUDGLRVWDWLRQLV
stored in this unit, Plug and Play is activated to
store all available radio stations automatically.
1
Connect the unit to the power supply.
[AUTO INSTALL - PLEASE PRESS
»
PLAY, STOP CANCEL] (press the
PLAY button to auto install; to cancel,
press ) displays.
2
Press
on the main unit to start
installation.
[AUTO] displays.
»
The unit automatically store radio
»
VWDWLRQVZLWKVXIÀFLHQWVLJQDOVWUHQJWK
When all the available radio stations
»
DUHVWRUHGWKHÀUVWSUHVHWUDGLRVWDWLRQ
is broadcast automatically.
Set clock
1
Press and hold
CLOCK/DISPLAY
to
activate the clock setting mode.
The 12 hour or 24 hour format is
»
displayed.
2
Press
PROG
repeatedly to select 12 hour
or 24 hour format.
3
Press
CLOCK/DISPLAY
WRFRQÀUP
The hour digits are displayed and begin
»
to blink.
4
Press
/
to set the hour.
EN
