16
9 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, TUNER or USB is activated to play at a
preset time.
1
Ensure that you have set the clock
correctly.
2
Press and hold
TIMER
.
3
Press
DISC
,
TUN
or
USB
to select a
source.
4
Press
TIMER
WRFRQÀUP
The hour digits are displayed and begin
»
to blink.
5
Press
/
to set the hour.
6
Press
TIMER
WRFRQÀUP
The minute digits are displayed and
»
begin to blink.
7
Press
/
to set the minute.
8
Press
TIMER
WRFRQÀUP
The timer is set and activated.
»
Activate and deactivate alarm timer
1
Press
TIMER ON/OFF
repeatedly to
activate or deactivate timer.
If timer is activated, the display shows
»
.
If timer is deactivated,
»
disappears on
the display.
Note
Alarm timer is not available in MP3 LINK
mode.
If DISC/USB source is selected and the
track cannot be played, tuner is activated
automatically.
Program radio stations
manually
Note
You can program a maximum of 20 preset
radio stations.
1
Tune to a radio station.
2
Press
PROG
to activate program mode.
[PROG] (program) blinks on the
»
display.
3
Press
ALB//-
to allocate a
number (1 to 20) to this radio station,
then press
PROG
WRFRQÀUP
The preset number and the frequency
»
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, store
another station in its place.
Select a preset radio station
1
Press
ALB//-
to select a preset
number.
Tip
)0DQWHQQDLVÀ[HGWRWKHPDLQXQLW
Position the antenna as far as possible from
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust
the position of the antenna.
EN
