8
EN
Note
&
If you are not going to use the remote control for a
long time, remove the batteries.
&
Do not use old and new or different types of batteries
in combination.
&
Batteries contain chemical substances, so they should
be disposed of properly.
Connect speakers
Note
&
For optimal sound, use the supplied speakers only.
&
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
<
Insert the speaker wires completely into the
speaker input sockets on the back of the unit.
Connect power
Caution
&
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the rear of the main unit.
&
Before connecting the AC cord, make sure that you
have completed all other connections.
Note
&
The type plate is located on the rear of the main unit.
R +
–
–
L +
1
Connect the power cord to the
AC~
jack
on the main unit.
2
Connect the power plug to the wall outlet.
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
»
qz{3|<{q00]9^<<90q]
<{39fq|f0
(press
to start
automatic installation, or press to
cancel) is displayed.
2
Press
on the main unit to start
installation.
»
The unit automatically stores radio
# @ @ <
»
When all the available radio stations
%
is broadcast automatically.
Set clock
Note
&
You can set the clock in standby mode only.
1
Press to switch the unit to standby.
2
Make sure that --:-- (or clock) is displayed.
MCM1055_51_UM_V1.1.indb 8
2012-2-3 16:43:37
