18
7
Press
VOL +/-
to set the minute.
8
Press
SLEEP/TIMER
to confirm.
The timer is set and activated.
»
Activate and deactivate the alarm
timer
1
In standby mode, press
SLEEP/TIMER
repeatedly to activate or deactivate the
timer.
If the timer is activated, the display
»
shows .
If the timer is deactivated,
»
disappears on the display.
Note
If disc/USB device source is selected and the track
•
cannot be played, tuner is activated automatically.
Listen through headphone
1
Plug a headphone into the socket on
the unit.
9 Use more of
your Micro
System
Set the sleep timer
This unit can switch to standby automatically
after a preset period of time.
1
When the unit is turned on, press
SLEEP/
TIMER
repeatedly to select a set period
of time (in minutes).
When sleep timer is activated, the
»
display shows .
To deactivate sleep timer
1
Press
SLEEP/TIMER
repeatedly until “SLP
OFF” is displayed.
When sleep timer is deactivated,
»
disappears on the display.
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, TUNER or USB is activated to play at a
preset time.
1
Ensure that you have set the clock
correctly.
2
In standby mode, press and hold
SLEEP/
TIMER
for more than 2 seconds.
3
Press
CD
,
TUNER
or
USB/MP3 LINK
to
select a source.
4
Press
SLEEP/TIMER
to confirm.
The hour digits are displayed and begin
»
to blink.
5
Press
VOL +/-
to set the hour.
6
Press
SLEEP/TIMER
to confirm.
The minute digits are displayed and
»
begin to blink.
EN
