8
EN
Set clock
1
In standby mode,
CLOCK
on the remote
control for 3 seconds.
»
The [24H]
or
[12H]
hour format is
displayed.
2
Press / to select the
[24H]
or
[12H]
hour format.
3
Press
CLOCK
to confirm.
»
The hour digits are displayed and begin
to blink.
4
Press / to select hour and press
CLOCK
to confirm.
»
The minute digits are displayed and
begin to blink.
5
Press / to select minute and press
CLOCK
to confirm.
Note
•
If no button is pressed in 10 seconds, the system exits
clock setting mode automatically.
Tip
•
You can press
CLOCK
to view clock information in
power-on mode.
Turn on
• Press .
»
The unit switches to the last selected
source.
Switch to standby mode
• Press again to switch the unit to standby
mode.
»
The clock (if set) is displayed on the
panel.
Switch to ECO standby mode:
• Press and hold for more than 3 seconds.
»
The display panel is dimmed.
Note
•
The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
To switch between standby mode and ECO
standby mode:
• Press and hold for more than 3 seconds.