background image

English

27

DOCK (Optional)

Playing an iPod/GoGear portable
player

1

Correctly dock your GoGear or iPod por table
player in the cradle. Make sure the dock adapter
is compatible.

Make sure that you have powered on Philips
GoGear before selecting DOCK source.

On the display, "GoGear" is displayed if Philips

GoGear is connected, or "iPod" is displayed if
iPod is connected.

2

Press 

SOURCE 

on the front panel of the

MCM276R Micro Hi-Fi System repeatedly or

DOCK

 on the remote to select DOCK source.

3

Playback starts automatically. You can select
available features (such as play/pause, skip track,
fast forward/backward) during playback.

Charging iPod battery using the
dock (GoGear charging not
supported)

In DOCK mode, directly dock your iPod
portable player on the cradle for charging.

Setup

1

Connect the iPod or GoGear docking cradle
(depending on the portable player you use) to
the MCM276R Micro Hi-Fi System by using the
docking cable and RCA to 3.5mm jack conver ter
(as shown on the last page).

Make sure to correctly connect the two line

out plugs of the docking cable to the line in
ports of the conver ter by matching colors
before connecting the docking cable to the
system.

2

Insert a dock adapter corresponding to the
portable player you use.

      

2

2

1

1

1

1

To connect with a different iPod/GoGear
portable player, pop up the corresponding dock
adapter and replace with a new one of the
matching type.

       

P001-P031_MCM276R_37_Eng

2006.7.26, 15:14

27

Summary of Contents for MCM276R



































Reviews: