12
Connect FM antenna
Tip
For optimal reception, fully extend and adjust the
•
position of the antenna.
For better FM stereo reception, connect an outdoor
•
FM antenna to the
FM AERIAL
jack.
The unit does not support MW radio reception.
•
1
Connect the supplied FM antenna to the
FM AERIAL
jack on the main unit.
a
b
c
3 Get
started
Caution
Use the controls only as stated in this user manual.
•
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for
the model and serial number of your unit. The
model number and serial number are on the
bottom of your unit. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
Ensure that the colors of the speaker wires and
•
terminals are matched.
For optimal sound, use the supplied speakers only.
•
Connect only speakers with impedance that is the
•
same or higher than the supplied speakers. Refer to the
Specifi cations section of this manual.
1
Hold down the socket fl ap.
2
Insert the stripped part of the wire
completely.
Insert the right speaker wires to “
•
R
”,
left speaker wires to “
L
”.
Insert the red wires to “
•
+
”, black wires
to “
-
”.
3
Release the socket fl ap.
EN
