15
Program radio stations
manually
Note
You can program a maximum of 20 FM radio
•
stations and 10 MW radio stations.
1
Tune to a radio station.
2
Press
PROG
to activate program mode.
[PROG] (program) blinks on the
»
display.
3
Press
to allocate a number (1 to 20)
to this radio station, then press
PROG
to
confirm.
The preset number and the frequency
»
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, store
•
another station in its place.
Select a preset radio station
1
In tuner mode, press
to select a
preset number.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to a RDS station, a RDS
icon and the station name are displayed.
1
Tune to a RDS station.
2
Press
DISPLAY/RDS
repeatedly to scroll
through the following information (if
available):
Station name
»
6 Listen to the
radio
Tune to a radio station
Note
For optimal reception, fully extend and adjust
•
the position of the FM antenna.
1
Press
TUNER
to select the tuner source.
2
Press and hold / for more than 2
seconds.
[SEARCH] (search) is displayed.
»
The radio tunes to a station with
»
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station, press
•
/
repeatedly until you find optimal
reception.
Program radio stations
automatically
Note
You can program a maximum of 20 FM radio
•
stations and 10 MW radio stations.
1
In tuner mode, press and hold
PROG
for
2 seconds to activate automatic program
mode.
[AUTO] (auto) is displayed.
»
All available stations are programmed
»
in the order of waveband reception
strength.
The first programmed radio station is
»
broadcast automatically.
English
EN
