background image

19

English

Clock/Timer

Clock setting

Manual clock setting

1

In standby mode, press and hold

CLOCK SET

.

The clock digits for the hours flash.

2

Adjust 

VOLUME

 

 

to set the hours.

3

Press 

CLOCK SET

 again.

The clock digits for the minutes flash.

4

Adjust 

VOLUME

 

 

to set the minutes.

5

Press 

CLOCK SET

 to confirm the time.

Timer setting

The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time (one time operation).  The clock
time needs to be set first before the timer can
be used.

You can also use it to record a favourite tuner
programme at a set period (refer to “Recording
timer”)

During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.

1

In standby mode, press 

PRESET

 

3

 for more

than two seconds.

2

Press 

SOURCE 

repeatedly to select the sound

source.

SET TIME

” and “

SELECT SOURCE

” are

displayed.

3

Press 

PRESET

 

3

 

to confirm your desired

mode.

SET ON TIME

” is displayed

 

and the clock

digits for the hours flash.

4

Adjust 

VOLUME

 

 

to set the hours.

5

Press 

PRESET

 

3

 

again.

The clock digits for the minutes flash.

6

Adjust 

VOLUME

 

 

to set the minutes.

7

Press 

PRESET

 

3

 

to confirm the time.

The timer is now set and activated.

Activating and deactivating timer

In standby or during playback, press 

TIMER

once 

on the remote control.

Display shows 

 

if activated, and disappears if

deactivated.

Sleep timer setting

The sleep timer enables the system to switch off
by itself after a set period of time.

1

Press 

SLEEP

 on the remote control repeatedly

to select a preset time.

The selections are as follows (time in

minutes):

60

60

60

60

60

 

 

45

45

45

45

45

 

 

30

30

30

30

30

 

 

15

15

15

15

15

 

 

0

0

0

0

0

 

 

60

60

60

60

60

 …

"

SLEEP XX

" or "

0

" is displayed. "

XX

" is the

time in minutes.

2

When you reach the desired length of time, stop
pressing the 

SLEEP

 button.

To deactivate the sleep timer

Press 

SLEEP

 repeatedly until "

0

" is displayed, or

press the 

STANDBY ON

 button.

DISPLAY/BAND

pg 001-023_M390_37-Eng

3/8/05, 20:56

19

Summary of Contents for MCM390
























Reviews: