23
English
Listening to an external source
You can listen to the sound of the connected
external device through your system’s speakers.
1
Use the red / white audio cables to connect the
system’s
AUX / CDR IN (R/L)
terminals to the
AUDIO OUT terminals on the other
audio / visual device (such as a TV, VCR, Laser Disc
player, DVD player or CD recorder)
➜
If the connecting device has only a a single
audio out terminal, connect it to the AUX /CDR
IN left terminal. Alternatively, you can use a
“single to double” cinch cable, but the output
sounds still remain mono.
2
Press
AUX
repeatedly.
➜
Select “
AUX
” when connecting to a TV, VCR
or Laser Disc player.
➜
Select “
AUX
/
CDR
” when connecting to a CD
recorder or DVD player.
3
Press PLAY on the connected device to start
playback.
Notes:
– All the sound control features (DSC, VEC for
example) are available for selection.
– Always refer to the owner’s manual of the other
equipment for complete connection and use
details.
Timer Operations
Other Connection
Temporarily deactivating the wake up
timer
You are only able to activate the Snooze
function within 30 minutes after the timer wakes
up from standby mode.
1
After timer wake up, press
SNOOZE
on the
remote.
➜
The system will switch to standby mode for
five minutes. After that, it resumes the last
selected source again.
2
To cancel the snooze function, press
SNOOZE
again.
Sleep timer setting
The sleep timer turns the system to Eco Power
standby mode at a preselected time.
1
Press
SLEEP
repeatedly until it reaches the
desired preset turn-off time.
➜
The selections are as follows (time in
minutes):
15
™
30
™
45
™
60
™
90
™
120
™
OFF
™
15
…
➜
SLEEP
is shown, except for "
OFF
" mode.
➜
To view or change the setting, repeat the
above.
2
Before the system switches to Eco Power
standby mode, a countdown of 10 seconds is
displayed.
"
SLEEP 10
"
™
"
SLEEP 9
"....
™
"
SLEEP 1
"
™
"
SLEEP
"
To cancel th
e sleep timer
●
Press
SLEEP
repeatedly until "
OFF
" is displayed,
or press the
STANDBY ON
B
button.