21
3139 115 23001
English
IMPORTANT!
–
Before playing a tape, check and
tighten slack tape with a pencil. Slack
tape may get jammed or may burst in
the mechanism.
–
C-120 tape is extremely thin and is
easily deformed or damaged. It is not
recommended for use in this system.
–
Store the tapes at room temperature
and do not put them too close to a
magnetic field (for example, a
transformer, TV or speaker.)
Playing a tape
1
Press
TAPE
to select tape mode.
2
Press
OPEN / CLOSE
0
to open the tape
deck door.
3
Insert a recorded tape and close the tape
deck door.
➜
Load the tape with the open side downward
and full spool to the left.
4
Press
ÉÅ
to start playback.
To change the playback side
●
Press
í
or
ë
on the remote.
➜
During playback, you can press
ÉÅ
on the
system to change the playback side.
➜
A
(BACK) or
B
(FRONT) appears on the
display, depending on the tape side selected.
To change the playback mode
●
Press
TAPE A/R
on the remote repeatedly
to select the different playback modes.
å
: playback on one side of the tape only.
∂
: both sides are played once.
∫
: both sides are played repeatedly, up
to 10 times each side unless you
press
Ç
.
Tape Operations/Recording
To rewind or fast forward
1
Stop playback, then press
à
/
á
on the
remote.
2
Press
Ç
when you reached the desired
passage.
➜
The tape will stop automatically at the end of
rewinding or fast forwarding.
To stop playback
●
Press
Ç
.
Helpful Hint:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD or
TUNER, for example.)
General information on
recording
●
For recording, use only tape of IEC type I
(normal tape.)
●
The recording level is set automatically,
regardless of the position of the Volume,
Incredible Surround, BASS/TREBLE and so
forth.
●
The tape is secured at both ends with leader
tape. At the beginning and
end of the tape, nothing will
be recorded for six to seven
seconds.
●
To prevent accidental
recording, break out the tab
on the left shoulder of the
tape side you want to protect.
●
If “CHECK TAPE” is displayed, the protection
tab has been broken. Put a piece of clear
adhesive tape over the opening.
001-027-MCM78_37-Eng
4/8/04, 15:01
21
