27
H
in
ts & t
ip
s
2
The position of the cartridge holder will show
you which cartridge needs to be replaced. The
arrows point to the cartridge that is empty.
3
Open the cartridge holder.
4
Remove the empty cartridge.
5
Take the ink cartridge out of its packaging
and remove the protective strip. Be careful
not to touch the nozzles and the contacts.
6
Insert the cartridge with the “nose” down into
the cartridge holder - the
colour cartridge
left
and the
black
cartridge right
.
7
Close the cartridge holder. You will hear a
click when it snaps shut.
8
Close the machine.
9
Insert the chip card “Plug’n’Print” with the
contacts facing up into the slot below the
control panel to update the cartridge infor-
mation.
10
Charging the cartridges may take a short
while time and is completed when the display
shows:
Action completed
Remove card