User Manual | USB flash drives
EN
Notes
• The USB flash drive may not function correctly if it is connected to the computer when
the computer is started up, restarted, or restored from sleep mode. Always disconnect
the USB flash drive from the computer before performing any of these operations.
• Do not place the drive at locations that are:
- extremely hot or cold;
- vibrating;
- exposed to corrosive gases;
- dusty or dirty;
- very humid;
- exposed to direct sunlight.
• Power consumption in standby mode: < 100 mA.
• Our product warranty is limited only to the USB flash drive itself, when used normally in
accordance with these operating instructions in the specified or recommended system
environment. Services provided by the company, such as user support, are also subject to
these restrictions.
• The company cannot accept liability for damage or loss resulting from the use of this unit,
or for any claim from a third party.
How to use
1.
Connect the USB drive to the USB port of your device.
2.
A software package will automatically start up enabling you to activate various applications.
3.
Do not remove the USB flash drive from the computer USB port while copying and saving
data otherwise the drive will no longer be recognized by your system.
How to format the USB drive
1.
Go to “This PC”.
2.
Right click the USB drive.
3.
Select “Format…”.
4.
Select the file system you need, and then select “Start”.
• Please note that formatting the USB drive will erase all data in the USB drive
and the data cannot be restored.
