19
English
Radio Reception
Manual Preset Programming
1
Tune to your desired radio station (refer to
“Tuning to radio stations”).
2
Press
PROGRAM
.
➜
PROG
starts flashing.
➜
The next available preset number is displayed
for selection.
To store the radio station to another
preset number
●
Press
í
or
ë
to select the desired preset
number.
3
Press
PROGRAM
again to store the radio
station.
➜
PROG
disappears.
●
Repeat
steps 1–3
to store other radio stations.
To exit manual preset mode
●
Press
Ç
on the system.
Notes:
– If you attempt to store more than 40 preset
radio stations, "
FULL
" is displayed.
– During programming, if no key is pressed within
20 seconds, the system will exit the programme
mode automatically.
Tuning to preset radio stations
●
Once you’ve programmed the radio stations,
press
í
or
ë
to select the desired preset
number.
➜
The preset number, radio frequency, and
waveband are displayed.
For Recording, please refer to “Tape
Operation/Recording”.
RDS
RDS (
R
adio
D
ata
S
ystem) is a broadcasting
service that allows FM stations to send additional
information along with the regular FM radio
signal. This additional information can contain:
Station name:
The radio station name is
displayed.
Programme type:
The following programme
types exist and can be received by your tuner:
News, Affairs, Info, Sport, Educate, Drama,
Culture, Science, Varied, Pop M, Rock M, M.O.R.
(middle of the road music), Light M, Classics,
Other M, No type.
Radio text (RT):
text messages appear on the
display.
To receive RDS Radio Stations
●
Tuned to a radio station from FM band.
➜
If the radio station is transmitting RDS signal,
the RDS logo (
RDS
) and the radio station name
will appear on the display.
To Check the RDS information
●
Press
RDS
repeatedly to scroll through the
following information (if available) :
STATION NAME
™
PROGRAMME TYPE
™
RADIO TEXT
™
TUNED FREQUENCY
™
STATION NAME ....
Notes:
– If the tuned radio station does not transmit RDS
signal or is a non RDS station, "
NO RDS
" is
displayed.
– If the RDS text message is not available at the
RDS station, "
NO RDS TEXT
" is displayed.
