English
TIMER/ SLEEP
5
Press TIMER or PROGRAM again.
™
The clock digits for the minutes flash.
6
Turn VOLUME to set the minutes: clockwise for minutes
up; anti-clockwise for minutes down.
7
Press TIMER or PROGRAM to confirm the time.
– The timer is now set and activated.
Display shows
N
.
Activating and deactivating TIMER
Press either:
• on the remote control,
TIMER during playback or in standby mode.
• on the set,
PROGRAM in standby mode.
™
Display shows
N
if activated, and disappears if
deactivated.
Activating and deactivating SLEEP
The sleep timer enables the unit to switch off by itself after
a set period of time. The clock time needs to be set first
before the sleep timer can be used.
• During playback to select and activate your desired
sleep time, press SLEEP on the remote control once or
more.
™
Display shows
SLEEP
and one of the sleep time
options in sequence:
60
,
45
,
30
,
15
,
SLEEP
OFF
,
60
...
• To deactivate, press SLEEP on the remote control once
or more until
SLEEP OFF
is shown, or press to
standby on the set or remote control.
™
SLEEP
disappears from the display.
CD PLAYER
Playing a CD
This CD player plays Audio Discs including CD-Recordables
and CD-Rewritables.
• CD-ROM, CD-I, CDV, VCD, DVD, MP3 or computer CDs,
however, are not possible.
1
Select CD source.
2
Press OPEN/CLOSE to open the CD tray.
™
OPEN
is displayed when you open the CD
compartment.
3
Insert a CD with the printed side facing up and press
down on OPEN/CLOSE to close the CD tray.
™
READ
is displayed as the CD player scans the
contents of a CD, and then the total number of tracks
and playing time are shown.
™
NO DISC
is displayed if you have inserted no
disc.
™
DISC NOT READABLE
scrolls across the
display if you insert a CD incorrectly or a non
finalised CD-R(W).
4
Press
2;
to start playback.
™
Current track number and elapsed playing time of the
track are displayed during CD playback.
5
To interrupt playback press
2;
. Press
2;
again to
resume playback.
™
The display freezes and the elapsed playing time
flashes when playback is interrupted.
6
To stop CD playback, press
9
.
Note: CD play will also stop when:
– the CD tray is opened;
– the CD has reached the end;
– you select another source: TAPE, CD R or AUX.
Selecting a different track
• Press
¡1
or
2™
on the set, (on the remote control
¡
or
™
) once or repeatedly until the desired track
number appears in the display.
• If you have selected a track number shortly after loading
a CD or in the PAUSE position, you will need to press
2;
to start playback.
Finding a passage within a track
1
Press and hold down on
¡1
or
2™
(on the remote
control
11
or
22
).
– The CD is played at high speed and low volume.
2
When you recognize the passage you want,
release
11
or
22
.
– Normal playback continues.
Note: During a CD programme or if SHUFFLE/ REPEAT acti-
ve, searching is only possible within the same track.
CD
SHUFFLE
PROGRAM
DBB
IO
IO
IO
II
IO
II
IO
II
IO
II
IO
IO
I II
OPEN
CLOSE
PRESET
TUNING
MC 158 COMPACT A
UDIO SYSTEM
IO
IO
IO
II
IO
II
IO
II
IO
II
IO
IO
I II
OPEN
CLOSE
PRESET
TUNING
MC 158 COMPACT A
UDIO SYSTEM
8
MZ-33 / 22 page 8
XP MZ-33 /22 01ENG 09-05-2000 09:32 Pagina 8
Summary of Contents for MZ-33
Page 1: ...MZ 33 ...
