Philips MZ7/21, User Manual

16

English

3139 116 19161

TUNER

Storing Preset Stations

You can store up to 40 radio stations in the
memory. When a preset radio station is
selected, the preset number appears next
to the frequency on the display.

Automatic programming
1

Press 

TUNER

.

2

Press 

PROGRAM

 for more than one

second.

™

The 

PROGRAM

 flag starts flashing and

“

AUTO

” will be displayed.

™

The system will search for every
available station in the FM waveband
first, then search by the MW and LW
wavebands.

™

All available radio stations will be
stored automatically. The frequency
and preset number will be displayed
briefly.

™

The system will stop searching when
all the available radio stations are
stored or when the memory for 40
preset radio stations is used.

™

The system will remain tuned to the
last stored preset radio station.

Notes:
– You can cancel the automatic

programming by pressing PROGRAM or
STOP (on the system only).

– If you want to reserve a section of

preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming: only
the preset numbers 10 to 40 will be
programmed.

Manual programming
1

Press 

TUNER

.

2

Press 

TUNER

 again to select the

desired waveband : FM, MW or LW.

3

Press 

PROGRAM

 for less than one

second.

™

The 

PROGRAM

 flag starts flashing.

™

The next available preset number will
be displayed for selection.

4

Press 

TUNE  

S 

 or 

T

(or  

à

/

á

on the remote control) to tune to the

desired frequency.

• If you wish to store the radio station to

another preset number, first select
PRESET mode, then press 

PRESET  

4

or 

3

 to select the desired preset

number.

™

The 

PRESET

 flag will be displayed.

5

Press 

PROGRAM

 again.

™

The 

PROGRAM

 flag disappears and the

radio station will be stored.

• Repeat the 

steps 3 to 5

 to store other

preset radio stations.

Notes:
– When 40 radio stations are stored and

you attempt to store another radio
station, the display will show"

 FULL

”.

If you want to change an existing preset
number, repeat steps 3 – 5.

– You can cancel manual programming by

pressing STOP (on the system only).

– During programming,  if no button is

pressed within 20 seconds, the system
will exit program mode automatically.

– When in programming mode, the

PRESET mode will automatically be
activated.

Tuning to Preset Radio
Stations

1

Press 

PRESET

 to switch on the PRESET

mode.

™

The 

PRESET

 flag will be displayed.

2

Press 

PRESET  

4

 or 

3  

(or 

í

 / 

ë

 on

the remote control) to select the desired
preset number.

™

The preset number, radio frequency,
and waveband appear on the display.

Receiving RDS Radio Station

Ç

RDS (Radio Data System) is a broadcasting
service that allows FM stations to send
additional information along with the
regular FM radio signal. This additional
information can contain:

•

STATION NAME:

 The radio station

name is displayed.

•

PROGRAM TYPE:

 The following

program types exist and can be received
by your tuner: News, Affairs, Info, Sport,
Educate, Drama, Culture, Science,
Varied, Pop M, Rock M, M.O.R. (middle
of the road music), Light M, Classics,
Other M, No type.

•

RADIO TEXT (RT):

 text messages

appear in the display.

When you have tuned to a RDS station, the
RDS logo (

Ç

) and the radio station name

will appear on the display:

• The display normally shows the radio

station name if available.
By repeatedly pressing 

RDS

 button you

can change the type of display
information:

™

The display shows in turn:

STATION NAME 

™

PROGRAM TYPE 

™

 RADIO

TEXT 

™

 STATION NAME

 ...