21
English
3139 116 19161
RECORDING
Dubbing tapes
(from tape deck 1 to
tape deck 2)
1
Press
TAPE
to select tape deck 2.
2
Load the prerecorded tape into tape
deck 1 and a blank tape into tape deck
2.
•
Make sure the tape in tape deck 1 has
its full spool to the left.
3
(For Tape Deck 2 only)
Press
SIDE
on the remote control to
select the recording side.
4
Press
DUBBING NORMAL•FAST
once
for normal speed dubbing or
twice
(within 2 seconds) for high speed
dubbing.
™
“
NORMAL
” (normal speed) or
“
FAST
” (high speed) will be
displayed, followed by
“
DUBBING
”.
™
The
HSD
flag appears on the display
during high speed dubbing.
• Dubbing will start immediately.
™
The
REC
flag starts flashing.
5
Press
STOP
to stop dubbing.
Notes:
– Only
å
å
å
å
å
mode is available during
dubbing.
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of
the same length.
– During high speed dubbing in Tape
mode, the sound is reduced to a low
volume.
– You can listen to another source while
dubbing.
CD Synchro Start Recording
During CD synchro start recording,
• Do not fast forward/rewind your tape in
tape deck 1.
• Do not listen to another source.
1
Press
TAPE
to select tape deck 2.
•
Load a blank tape into tape deck 2 with
the open side downward.
2
Press
SIDE
on remote control to select
the recording side.
3
Press
A. REV
to select the playback
mode (
å
å
å
å
å
or
˙
).
4
Press
3 CDC
.
• You can program the tracks in the order
you want them to be recorded (see
Programming Tracks). If you do not, the
tracks are recorded according to the
order on the selected disc.
5
Press
CD SYN
to start recording.
™
The
REC
flag starts flashing.
6
Press
STOP
to stop recording CD
playback.
One Touch Recording
• For One Touch Recording, as soon as you
press
REC
, the current source (3 CDC,
TUNER or CDR/AUX) will be recorded on
tape deck 2
1
Load a blank tape in tape deck 2.
2
Press
REC
to start recording.
™
The
REC
flag starts flashing.
3
Press
STOP
to stop recording.
Note:
– When you press RECORD while in TAPE
mode, "
SELECT SOURCE
" will be
displayed. One Touch Recording is not
possible in TAPE mode.
Digital Recording via Digital
Out
For CD digital recording, please refer to the
Instructions Manual of the CD Recorder,
digital audio equipment, etc.
Summary of Contents for MZ7/21
Page 1: ...3139 116 19161 Mini Hi Fi System ...
Page 4: ...3139 116 19161 ...
