Initial setup 7
k
LED indicator
•
Each time you press a button on the
remote control, the LED lights up briefly
then off.
•
Blue light indicates the remote control
is in Android TV mode and navigation of
Android TV interface is possible.
•
Red light indicates the remote control is
accessing the projector system settings
and navigation of Android TV interface
is not possible.
l
Switch the projector on or to standby.
3 Initial setup
Notice
Make sure all devices are disconnected
from their power supplies before
establishing or changing any
connections.
Place the projector
Place the projector on a flat surface such as a
table in front of the projection surface.
You can also install the projector in different
configurations (
Connect to power supply
CAUTION!
Always use the button to turn the
projector on and off.
1
Select a supplied power cable with the
correct plug (EU/UK/US/CH).
2 Connect one end of the power cable to the
power socket on the back of the projector
and the other end to an electrical socket.
• The LED on the projector lights up in
red.
HDMI
SPDIF
USB
AV