6.
7.
TRIMMING
To groom sideburns and moustache:
1
Turn razor ON.
2
Push up Trimmer Slide Switch.
3
Hold Trimmer as shown and move in downward strokes
with gentle pressure.
4
Close Trimmer by sliding Trimmer switch down.
5
Turn razor OFF.
CLEANING
Once A Week: Razor
1
Turn razor OFF (disconnect cord from razor and outlet
if using razor corded).
2
Clean the top of the razor with the supplied brush.
3
Remove Razor Head Assembly from the razor unit.
4
Brush the inside of housing and Razor Head Assembly.
5
Replace the Razor Head Assembly back on to razor.
Every Two Months: Razor Heads
1
Turn razor OFF and disconnect from outlet.
2
Remove Razor Head Assembly from housing unit.
3
Brush the inside of the housing.
4
Turn Razor Head Assembly over so that the
underside is exposed.
5
Press down and turn wheel of frame counterclockwise.
6
Remove the frame and brush clean.
7
Slide and remove one cutter and head at a time to clean.
•
Be careful not to mix up cutters and heads.They
are a matched set and if interchanged, it will greatly
affect shaving performance.
8
Separate the cutter from the head.
