ENGLISH
C
6
Hold the shaving head holder in your hand
and place the retaining ring on the shaving
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
Do not place the shaving head holder on a
surface, as damage may occur.
7
Repeat this process for the other two
cutters and combs.
C
NOTE: Each retaining ring has two recesses and
two projections that fit exactly in the projections
and recesses of the shaving head holder. Make sure
you hear a 'click' indicating the retaining ring is fixed
into place.
C
8
Reinsert the hinge of the shaving head
holder into the slot of the shaving unit.
Close the shaving head holder (click).
C
9
To reset the shaver, press and hold the On/
Off button for approximately 7 seconds.
35
ENGLISH
C
1
Press the shaver head release button to
open the shaving unit.
C
2
Pull the shaving head holder off the
bottom part of the shaving unit.
C
3
Turn the retaining ring counterclockwise
(1) and lift it off the shaving head (2).
C
4
Remove the shaving heads from the
shaving head holder and discard.
DO NOT discard the retaining ring.
C
5
Place a new shaving head in the holder.
Make sure the projections of the shaving head
fit exactly into the recesses on the shaving head
holder.
34
1
2
7 sec.
1
2
