Contents
1.
Introduction
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.
Installing the remote control
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Automatically setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . 6
3.
Keys and functions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.
Extra possibilities
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Adjusting device selection (Mode-selector) . . . . . . . . . . . . . . . . . . . . . . 8
Adding a remote control function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Restoring the original remote control settings . . . . . . . . . . . . . . . . . . . . 9
5.
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6.
Need help?
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Code list of all brands / equipment
. . . . . . . . . . . . . . . . . . . . 82-90
1. Introduction
Congratulations on your purchase of the Philips SBC RU545 universal remote
control. After installing the remote control you can operate a maximum of
4 different appliances with it:
TV, DVD, video recorder and satellite or cable decoders.
You can find information about how to prepare this remote control for use in
the chapter ‘Installing the remote control’.
2. Installing the remote control
Inserting the batteries
1
Press the cover inwards and slide it in the
direction of the arrow.
2
Place two R03, UM4 or AAA type batteries
into the battery compartment, as shown.
3
Slide the cover back and click it firmly into
place.
Testing the remote control
The remote control has been programmed to operate most Philips
appliances. Because the RU545 may use different signals for each make and
even for different models of the same make, it is advisable to test whether
your appliance responds to the RU545.
The example below (TV) instructs you how to do this.
You can repeat the same steps for other appliances
(DVD, video recorder, etc.) which you want to operate using the RU545.
Example of TV:
1
Turn your TV on manually or use the original remote control.
Tune to channel 1.
2
Use the RU545’s mode selector to select TV.
Press the key until the green light under TV in
the selector window lights up.
If no green light appears, check whether the
batteries are properly inserted
(see ‘Inserting the batteries’).
4
Instructions for use
English
TV
VCR
SAT DVD
XP SBC RU 545/00U.2 08-04-2004 11:32 Pagina 4
