background image

Published by Philips Consumer Lifestyle 

Printed in the Netherlands 

© Copyright reserved 

Subject to modification

Service Manual

Philips Consumer Lifestyle

PerfectCare Aqua

GC8615

12/07

PRODUCT INFORMATION
Fast & powerful crease removal

• Soleplate: SteamGlide
• OptimalTemp
•  Continuous steam output
•  Continuous steam output:  120 g/min
• Vertical steam
•  Steam pressure:  Up to 5 bar
• Steam tip
• Power: 2400 W 

Easy to use

•  Water tank capacity:  2200 ml
•  Filling and emptying water:  Extra large filling hole
•  Refill any time
•  Heat-up time:  2 min
•  Hose storage:  Hose storage compartment
•  Power cord length:  1.8 m
•  Hose length:  1.6 m
•  Safe for all fabrics:  Even for delicates like silks
•  Low water alarm

Calc management

•  Suitable for tap water
•  Calc clean solution:  Easy De-calc
•  Calc clean reminder

Safety Information

•  This product meets the requirements regarding 

interference suppression on radio and TV. 

•  After the product has been repaired, it should function 

properly and has to meet the safety requirements and 
legal regulations as officially laid down at this moment. 

Summary of Contents for PerfectCare Aqua GC8615













Reviews: