Cannot switch to AV-in
or no signal
• Unplug the AV-in connection and plug-in
again.
• Check the connection from the AV out-
put device, such as digital camera, video
recorder, etc.
• Use the provided AV cable for connec-
tion.
Switch between
DVD/USB/AV-in
• DVD mode is default source during the
DVD player power on.
• Plug in USB will activate USB mode.
Deactivate it by unplug the connection.
• Plug in AV-in will activate AV-in mode.
And deactivate it by unplugging the con-
nection.
• Do not plug-in USB & AV-in at the same
time. Plug-in one type connection at a
time only.
• Unplug the connection before you
plug-in another connection.
Player feels warm
When the player is in use for a long period
of time, the surface will be heated.
This is normal.
Display goes dimmer
when AC is unplugged
The unit is saving power to ensure longer
playtime with battery. It is normal.
Adjust the brightness in the
SETUP
menu.
This set complies with the radio interference requirements of the
European Union.
8 Technical data
Dimensions
27 x 19 x 3.8 cm
10.6 x 7.5 x 1.5 inches
Weight
1.5 kg / 3.3 lb
PET1035_CCR_Eng 2007.10.12 10:38 Page 42